|
Features
|
1.Low price and high reliablity.
2.105 degrees output capacitor.
3.AC input power suitable for the world.
4.High efficiency and low operation temperature.
5.Soft-start current can reduce the AC input impact effecticly.
6.With short-circuit and overload protection.
7.100% full-load burn-in test.
8.Installed with EMI filter,minimum wave.
|
|
|
Model
|
S-25-5
|
S-25-12
|
S-25-15
|
S-25-24
|
|
DC output voltage
|
5V
|
12V
|
15V
|
24V
|
|
Output ovltage range(Note:2)
|
±2%
|
±1%
|
±1%
|
±1%
|
|
Rated output current
|
5A
|
2.1A
|
1.7A
|
1.1A
|
|
Output current range
|
0-5A
|
0-2.1A
|
0-1.7A
|
0-1.1A
|
|
Wave and noise(Note:3)
|
50mVp-p
|
100mVp-p
|
100mVp-p
|
100mVp-p
|
|
Intel stability(Note:4)
|
±0.5%
|
±0.5%
|
±0.5%
|
±0.5%
|
|
Load stability(Note:5)
|
±1%
|
±0.5%
|
±0.5%
|
±0.5%
|
|
DC Output power
|
25W
|
25.2W
|
25.5W
|
26.4W
|
|
Efficiency
|
65%
|
76%
|
77%
|
80%
|
|
Adjustable range for DC voltage
|
+10%,-5%
|
±10%
|
±10%
|
±10%
|
|
AC input voltage range
|
85-132VAC/170-264VAC selected by switch 47-63Hz；240-370VDC
|
|
Input current
|
0.6A/115V 0.35A/230V
|
|
AC inrush current
|
Cole-start current 15A/115V 30A/230V
|
|
Leakage current
|
<0.75mA/240VAC
|
|
Over load protection
|
105%-150% Type:pulsing hiccup shutdown Reset:auto recovery
|
|
Over-voltage protection
|
115%-135%
|
|
High-temperature protection
|
............
|
|
Temperature coefficient
|
±0.03%/℃(0-50℃)
|
|
Setup,rise,hold up time
|
200ms,100ms,30ms
|
|
Vibration
|
10-500Hz，2G 10min，/1cycle,period for 60min,each axes
|
|
Withstand voltage
|
Input and output internal:1.5KvAC Input and enclosure:1.5KvAC Output and enclosure:0.5KvAC
|
|
Isolation resistance
|
Input and output internal,Input and enclosure,Output and enclosure:500VDC/100MΩ
|
|
Working temperature and humidity
|
-10℃-+60℃ Refer to output derating curve 20%-90%RH
|
|
Stoerall dimension
|
-20℃-+85℃，10%-95%RH
|
|
Overall dimension
|
99×97×35mm
|
|
Weight
|
0.37kgs
|
|
Safety standards
|
Meet UL 1012 requirement (Not apply for the mark)
|
|
EMC standards
|
Meet FCC PART 15J Conduction class B
|
|
Note:
|
1.The testing condition for the paramenter above is:230VAC input,rated load,25 degrees 70%RH,Temperature.
2.Error:Include the setting error,line stability and load stability.(Note:5)
3.Wave test:adoping A12 doubl wire for 20MHz,nd 0.1UF&47UF capacitor short-circuit for interrupting.
4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.
5.Load stavility test:The load is from 0% to 100%.
|
+86-13706607783 
+86-15867792525 
Click consult 