GYH31-SP

GYH31-SP

Technical Parameters

PHASE 3 phase in / 1 phase out
CAPACITY 10000 VA / 8000 W 15000 VA / 12000 W 20000 VA / 16000 W 30000VA/24000W
INPUT

Nominal Voltage 3 x 400 VAC (3Ph+N)
Voltage Range  305-478 VAC (3-phase) @ 100% load
190-520 VAC (3-phase) @ 50% load
Frequency Range
46~54 Hz or 56~64Hz
Power Factor ≧ 0.99  @ 100% load
OUTPUT
Output Voltage 208/220/230/240VAC
AC Voltage Regulation (Batt. Mode) ± 1%
Frequency Range (Synchronized Range) 46~54 Hz ◎ 50 Hz / 56~64 Hz ◎ 60 Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz 或60 Hz ± 0.1 Hz
Current Crest Ratio 3:1 (Max)
Harmonic Distortion ≦ 2 % THD (Linear Load)
≦ 5 % THD (Non-linear Load
Transfer Time AC Mode to Batt. Mode zero
Inverter to Bypass zero
Waveform (Batt. Mode) Pure Sine Wave
EFFICIENCY
AC Mode 89% 89% 89% 90%
Battery Mode 86% 88% 87% 89%
BATTERY
Standard Model Battery Type 12 V / 9 AH
Numbers 16 pcs 16 pcs x 2 strings 16 pcs x 3 strings
Typical Recharge Time 9 hours recover to 90% capacity
Charging Current (max.) 1A 2A 2A 2A
Charging Voltage 273 VDC ± 1%(based on 20 pcs batteries)
Long-run Model Battery Type Depending on the capacity of external batteries
Numbers 16pcs(192V) 16pcs(192V) 16pcs(192V) 20pcs(240V) (18-20adjustable)
Charging Current (max.) 4A 4A 4A 12A
Charging Voltage 273 VDC ± 1%(based on 20 pcs batteries)
INDICATORS
LCD Panel UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions
ALARM
Battery Mode Sounding every 4 seconds
Low Battery Sounding every second
Overload Sounding twice every second
Fault Continuously sounding
PHYSICAL
Standard Model Dimension, D X W X H (mm) 592 X 250 X 576 815 x 250 x 826 815*300*1000
Net Weight (kgs) 83 164 234
Long-run Model Dimension, D X W X H (mm) 592 X 250 X 576 592 X 250 X 576 815 x 250 x 826
Net Weight (kgs) 28 40 64
ENVIRONMENT
Operation Humidity 0-95 % RH @ 0- 40°C (non-condensing)
Noise Level Less than 58dB @ 1 Meter Less than 60dB @ 1 Meter Less than 65dB @ 1 Meter
MANAGEMENT
Smart RS-232 Supports Windows® 2000/2003/XP/Vista/2008, Windows®  7/8, Linux, Unix, and MAC
USB
Optional SNMP Power management from SNMP manager and web browser

* Derate capacity to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.
*If the UPS is installed or used in a place where the altitude is above than 1000m, the output power must be derated one percent per 100m.
* L means long-run model
* Product specifications are subject to change without further notice